DIG GE200 Guide d'installation télécharger pdf

INTRODUCTION

THANK YOU for purchasing the DIG Model GE200 Drip and Micro Sprayer Watering System. Please take the time to read

through the enclosed instructions and follow them step by step. If you have any questions, please call our customer service

line at 1-800-344-2281.

GENERAL DESCRIPTION

Use these guidelines for the design and installation of a cost effective and reliable drip and micro sprayer irrigation system

for your landscape area, to promote efﬁcient water use and to protect natural resources.

PLANNING

Make a rough sketch of the areas you would like to water. Make sure you take into account plant type, the location of each

tree, shrub, or groundcover, planting density and soil type. Based on the plant size and concentration, you will determine the

number of drippers per plant or the use of micro sprayers. Show the site's water sources and paved areas. This will require

measuring the area you wish to water. We recommend using graph paper; this will make drawing to scale easier.

DESIGNING

When designing your system, make sure to have a design drawing before you start the job. Design drawings should be

clearly readable to scale, and should include water location, layout of drip tubing, drip emitters, micro sprayers, ﬁttings, end

line for ﬂushing, plant materials and sidewalks. You have various options with your layout. To cover concentrated area such

as ﬂowerbeds or densely planted groundcover, use micro sprayers 5'-6' apart. For shrubs, vines, and roses use drippers (see

details on page 13 of The Drip and Microsprinkler Planning and Design Manual). These drawings illustrate some methods by

which you may lay out a drip system or micro sprinker system.

DRIP LAYOUT

For detailed information, see DIG planning guide DS20-L, or www.digcorp.com

MICRO SPRAYER LAYOUT

INSTALLATION INSTRUCTIONS

Drip and Micro Sprayer

Watering System

Model GE200

1-800-322-9146 FAX: 760-727-0282

1210 Activity Drive

Vista, CA 92081-8510

www.digcorp.com

e-mail: [email protected]

DIG CORPORATION 2 YEAR WARRANTY

DIG CORPORATION warrants these products to be free from defects in material and workmanship for a period of two years

from date of purchase. This warranty does not cover damage resulting from accident, misuse, neglect, modiﬁcation,

improper installation or subjection to line pressure in excess of 50 lbs. per square inch. This warranty shall extend only to the

original purchaser of the product for use by the purchaser. This warranty shall not cover batteries or any malfunction of the

product due to battery failure. The obligation of DIG CORPORATION under this warranty is limited to repairing or replacing at

its factory this product which shall be returned to the factory within two years after the original purchase and which on

examination is found to contain defects in material and workmanship.

DIG CORPORATION SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND; THE

SOLE OBLIGATION OF DIG BEING LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS. SOME STATES DO NOT

ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR

EXCLUSION MAY NOT APPLY TO YOU.

Unattended use for prolonged periods without inspection to verify proper operation is beyond the intended use of this

product, and any damage resulting from such use shall not be the responsibility of DIG CORPORATION. There are no

warranties which extend beyond the description on the face hereof. In the case of purchase of the product for use other than,

for irrigation purposes, DIG CORPORATION hereby disclaims any implied warranties including any warranties of

merchantability and ﬁtness for a particular purpose. In the case of the purchase of the product for personal, family or

household purposes, DIG CORPORATION disclaims any such warranties to the extent permitted by law. To the extent that any

such disclaimer or implied warranties shall be ineffectual, then any implied warranties shall be limited in duration to a period

of one year from the date of the original purchase for use by the purchaser. Some states do not allow limitation on how long

an implied warranty lasts, so the above limitation may not apply

to you.

In order to obtain performance under this warranty, the unit must be returned to the factory, along with proof of purchase

indicating original date of purchase, shipping prepaid, addressed as follows:

DIG CORPORATION, 1210 Activity Drive, Vista, CA 92083. Repaired or replaced units will be shipped prepaid to the name and

address supplied with the unit returned under warranty. Allow four weeks for repairs and shipping time. Repair of damaged

units not otherwise within warranty may be refused or done at a reasonable cost or charge at the option of DIG

CORPORATION.

This warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state.

1 2

Résumé du contenu

Page 1 - Watering System

INTRODUCTIONTHANK YOU for purchasing the DIG Model GE200 Drip and Micro Sprayer Watering System. Please take the time to readthrough the enclosed inst

Page 2 - INSTALLATION

INSTALLATIONBegin your installation at the water source by attaching the backﬂow preventer to your faucet, thenattach the 25 PSI preset pressure regul

Commentaires sur ces manuels

Pas de commentaire

DIG GE200 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non DIG GE200. DIG GE200 Installation Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels